6.1 On most models, the direction indicator and hazard warning light unit is located in the fuse box
2. If you hear distinct clicks when the switch is operating, the switch is working properly. If the turn signal fails on one side and you do not hear the characteristic clicks of the switch, the indicator lamp should indicate that the turn signal has failed.
3. If both turn signals do not flash, the fuse may be blown. The breaker may have failed, the switch may be broken, or the connections may be loose. If the breaker fuse is blown, check the circuit for a short before installing a new fuse.
4. To replace the breaker, simply remove it from the fuse box or wiring harness.
5. Make sure that the device being replaced is the same as the one removed.
Before installation, compare the new breaker with the old one.
Information copied from the website mitsubishiman.ru
6. Installation is carried out in reverse order.