Windshield wiper operation control switch
The switch is part of the assembly of the right steering column switch - see Chapter Suspension and steering.
Rear window wiper control switch
1. Disconnect the negative cable from the battery.
Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
2. Using a suitable tool, release the locking tabs and carefully release the switch from the instrument panel.
3. Disconnect electroconducting and remove the switch from the car.
4. Installation is carried out in the reverse order.
The switch of management of a mode of functioning of running lights
1. Disconnect the negative cable from the battery.
Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
2. Using a screwdriver or other suitable tool, pry off the tabs on the sides of the assembly and carefully separate the switch trim panel.
3.Remove the trim assembly with the switch from the vehicle instrument panel.
4. Disconnect the electrical wiring and remove the switch.
5. Installation is carried out in the reverse order.
Switch for selecting the operating mode of the headlights
The switch is part of the assembly of the left steering column switch - see Chapter Suspension and steering.
Tempostat operation control switch
The switch is part of the assembly of the left steering column switch - see Chapter Suspension and steering.
The switch of management of functioning of indexes of turns
The switch is part of the assembly of the left steering column switch - see Chapter Suspension and steering.