Contents: Removal the second row of seats ⤓ Installing the second row of seats ⤓ Disassembling the second row of seats ⤓ Assembling the second row of seats ⤓
Removal the second row of seats
1. Remove the headrest (1).
2. Remove the seat mounting cover (2).
3. Remove the rear/second row seats (3).
4. Remove the seat canopy cover (short wheelbase model) (4).
5. Remove the side seat back assembly (short wheelbase model) (5).
Installing the second row of seats
Note: When installing, tighten the bolts to the tightening torques shown in the figure.
1. Install the seat back assembly (short wheelbase model) (5).
2. Install the seat canopy cover (short wheelbase model) (4).
3. Install the rear/second row seats (3).
4. Install the seat mounting cover (2).
5. Install the headrest (1).
Disassembling the second row of seats
Left seat (short wheelbase model)
1. Remove the lower cover of the seat backrest tilt adjustment device (1).
2. Remove the center cover of the seat backrest tilt adjustment device (2).
3. Remove the canopy cover (3).
4. Disconnect the gas shock absorber connection (4).
5. Remove the rear seat cushion lower cover (5).
6. Disconnect the connection of the gripper cable A, B (6).
7. Remove the gripper cable A (7).
8. Remove the hinge bracket (8).
9. Remove the grab cable B (9).
10. Remove the seat back assembly (10).
11. Remove the seat folding button (11).
12. Remove the seat folding button trim (12).
13. Remove the headrest guide (13).
14. Remove the rear seat rear panel (14).
15. Remove the rear seat back cover (15).
16. Remove the rear seat back cushion (16).
17. Remove the rear seat back frame (17).
18. Remove the shaft (18).
19. Remove the rear cover of the seat backrest tilt adjustment device (19).
20. Remove the rod (20).
21. Remove the spring (21).
22. Remove the rear seat backrest tilt adjustment lever (22).
23. Remove the rear seat backrest tilt adjustment device (23).
24. Remove the gas shock absorber (24).
25. Remove the rear seat catch assembly (25).
26. Remove the upper support cover (26).
27. Remove the lower support cover (27).
28. Remove the rear seat belt catch (28).
29. Remove the rear seat cushion cover assembly (29).
30. Remove the support cushion (30).
31. Remove the rear seat cushion (31).
32. Remove the rear seat cushion frame (32).
33. Remove the striker cover (33).
34. Remove the striker (34).
35. Remove the plug (35).
36. Remove the hinge bracket (36).
37. Remove the cup holder (37).
38. Remove the bushing (38).
39. Remove the side backrest of the rear seat (39).
Right seat (short wheelbase model)
1. Remove the lower cover of the seat backrest tilt adjustment device (1).
2. Remove the seat belt catch (2).
3. Remove the center cover of the seat back tilt adjustment device (3).
4. Disconnect the gas shock absorber connection (4).
5. Remove the rear seat cushion lower cover (5).
6. Disconnect the connection of the gripper cable A, B (6).
7. Remove the gripper cable A (7).
8. Remove the rear seat back assembly (8).
8. Remove the seat folding button (9).
10. Remove the seat folding button cover (10).
11. Remove the rear seat rear panel (11).
12. Remove the headrest guide (12).
13. Remove the rear seat belt center cover (13).
14. Remove the seat belt mounting cover (14).
15. Remove the rear seat back cover (15).
16. Remove the rear seat back cushion (16).
17. Remove the rear seat back frame (17).
18. Remove the rear seat belt cover (18).
19. Disconnect the central seat belt connection (19).
20. Remove the shaft (20).
21. Remove the rear cover of the seat backrest tilt adjustment device (21).
22. Remove the rod (22).
23. Remove the spring (23).
24. Remove the rear seat backrest tilt adjustment lever (24).
25. Remove the rear seat backrest tilt adjustment device (25).
26. Remove the gas shock absorber (26).
27. Remove the rear seat catch assembly (27).
28. Remove the upper support cover (28).
29. Remove the lower support cover (29).
30. Remove the seat belt catch (30).
31. Remove the central seat belt (31).
32. Remove the rear seat cushion cover (32).
33. Remove the rear seat cushion (33).
34. Remove the rear seat cushion frame (34).
35. Remove the striker cover (35).
36. Remove the striker (36).
37. Remove the plug (37).
38. Remove the hinge bracket (38).
39. Remove the cup holder (39).
40. Remove the bushing (40).
41. Remove the side backrest of the rear seat (41).
Left seat (long wheelbase model)
1. Remove the lower cover of the seat backrest tilt adjustment device (1).
2. Remove the center cover of the seat backrest tilt adjustment device (2).
3. Remove the canopy cover (3).
4. Disconnect the gas shock absorber connection (4).
5. Remove the rear seat lower cover (5).
6. Disconnect the seat back tilt cable connection (6).
7. Disconnect the connection of the gripper cable A, B (7).
8. Remove the gripper cable A (8).
9. Remove the hinge bracket (9).
10. Remove the grab cable B (10).
11. Remove the rear seat back assembly (11).
12. Remove the seat folding button (12).
13. Remove the seat folding button trim (13).
14. Remove the side backrest of the rear seat (14).
15. Remove the headrest guide (15).
16. Remove the rear seat rear panel (16).
17. Remove the rear seat back cover (17).
18. Remove the rear seat back cushion (18).
19. Remove the rear seat back frame (19).
20. Remove the shaft (20).
21. Remove the seat back tilt device cover (21).
22. Remove the rod (22).
23. Remove the spring (23).
24. Remove the seat back tilt adjustment device (24).
25. Remove the gas shock absorber (25).
26. Remove the seat back tilt cable (26).
27. Remove the rear seat catch assembly (27).
28. Remove the upper support cover (28).
29. Remove the lower support cover (29).
30. Remove the seat back tilt button (30).
31. Remove the seat belt catch (31).
32. Remove the rear seat cushion cover (32).
33. Remove the support cushion (33).
34. Remove the rear seat cushion (34).
35. Remove the rear seat cushion frame (35).
36. Remove the striker cover (36).
37. Remove the striker (37).
38. Remove the plug (38).
Right seat (long wheelbase model)
1. Remove the lower cover of the seat backrest tilt adjustment device (1).
2. Remove the seat belt catch (2).
3. Remove the center cover of the seat back tilt adjustment device (3).
4. Disconnect the gas shock absorber connection (4).
5. Remove the rear seat lower cover (5).
6. Disconnect the seat back tilt cable connection (6).
7. Disconnect the connection of the gripper cable A (7).
8. Remove the gripper cable A (8).
9. Remove the rear seat back assembly (9).
10. Remove the seat folding button (U).
11. Remove the seat folding button trim (11).
12. Remove the side backrest of the rear seat (12).
13. Remove the rear seat rear panel (13).
14. Remove the armrest (14).
15. Remove the cup holder (15).
16. Remove the headrest guide (16).
17. Remove the rear seat belt center cover (17).
18. Remove the seat belt mounting cover (18).
19. Remove the rear seat back cover (19).
20. Remove the rear seat back cushion (20).
21. Remove the rear seat back cushion frame (21).
22. Remove the rear seat belt cover (22).
23. Disconnect the central seat belt connection (23).
24. Remove the shaft (24).
25. Remove the seat back tilt device cover (25).
26. Remove the rod (26).
27. Remove the spring (27).
28. Remove the seat back tilt adjustment device (28).
29. Remove the gas shock absorber (29).
30. Remove the seat back tilt cable (30).
31. Remove the rear seat catch assembly (31).
32. Remove the upper support cover (32).
33. Remove the lower support cover (33).
34. Remove the seat back tilt button (34).
35. Remove the seat belt catch (35).
36. Remove the central seat belt (36).
37. Remove the rear seat cushion cover (37).
38. Remove the rear seat cushion (38).
39. Remove the rear seat cushion frame (39).
40. Remove the striker cover (40).
41. Remove the striker (41).
42. Remove the plug (42).
Assembling the second row of seats
Left seat (short wheelbase model)
Note: When assembling, tighten the bolts to the tightening torques shown in the figure.
1. Install the rear seat side backrest (39).
2. Install the bushing (38).
3. Install the cup holder (37).
4. Install the hinge bracket (36).
5. Install the plug (35).
6. Install the striker (34).
7. Install the striker cover (33).
8. Install the rear seat cushion frame (32).
9. Install the rear seat cushion (31).
10. Install the support cushion (30).
11. Install the rear seat cushion cover assembly (29).
12. Install the rear seat belt catch (28).
13. Install the lower support cover (27).
14. Install the top cover of the support (26).
15. Install the rear seat catch assembly (25).
16. Install the gas shock absorber (24).
17. Install the rear seat backrest tilt adjustment device (23).
18. Install the rear seat backrest tilt adjustment lever (22).
19. Install the spring (21).
20. Install the rod (20).
21. Install the rear cover of the seat backrest tilt adjustment device (19).
22. Install the shaft (18).
23. Install the rear seat back frame (17).
24. Install the rear seat back cushion (16).
25. Install the rear seat back cover (15).
26. Install the rear seat rear panel (14).
27. Install the headrest guide (13).
28. Install the seat folding button trim (12).
29. Install the seat folding button (11).
30. Install the seat back assembly (U).
31. Install the grab cable B (9).
32. Install the hinge bracket (8).
33. Install the gripper cable A (7).
34. Connect the gripper cable connection A, B (6).
35. Install the rear seat cushion lower cover (5).
36. Connect the gas shock absorber connection (4).
37. Install the canopy cover (3).
38. Install the center cover of the seat back tilt adjustment device (2).
39. Install the lower cover of the seat back tilt adjustment device (1).
Right seat (short wheelbase model)
Note: When assembling, tighten the bolts to the tightening torques shown in the figure.
1. Install the rear seat side backrest (41).
2. Install the bushing (40).
3. Install the cup holder (39).
4. Install the hinge bracket (38).
5. Install the plug (37).
6. Install the striker (36).
7. Install the striker cover (35).
8. Install the rear seat cushion frame (34).
9. Install the rear seat cushion (33).
10. Install the rear seat cushion cover (32).
11. Install the central seat belt (31).
12. Install the seat belt catch (30).
13. Install the lower support cover (29).
14. Install the top cover of the support (28).
15. Install the rear seat catch assembly (27).
16. Install the gas shock absorber (26).
17. Install the rear seat backrest tilt adjustment device (25).
18. Install the rear seat backrest tilt adjustment lever (24).
19. Install the spring (23).
20. Install the rod (22).
21. Install the rear cover of the seat backrest tilt adjustment device (21).
22. Install the shaft (20).
23. Connect the central seat belt connection (19).
24. Install the rear seat belt protector (18).
25. Install the rear seat back frame (17).
26. Install the rear seat back cushion (16).
27. Install the rear seat back cover (15).
28. Install the seat belt fastening cover (14).
29. Install the rear seat belt center cover (13).
30. Install the headrest guide (12).
31. Install the rear seat rear panel (11).
32. Install the seat folding button trim (10).
33. Install the seat folding button (9).
34. Install the rear seat back assembly (8).
35. Install the gripper cable A (7).
36. Connect the gripper cable connection A, B (6).
37. Install the rear seat cushion lower cover (5).
38. Connect the gas shock absorber connection (4).
39. Install the center cover of the seat back tilt adjustment device (3).
40. Install the seat belt catch (2).
41. Install the lower cover of the seat back tilt adjustment device (1).
Left seat (long wheelbase model)
Note: When assembling, tighten the bolts to the tightening torques shown in the figure.
1. Install the plug (38).
2. Install the striker (37).
3. Install the striker cover (36).
4. Install the rear seat cushion frame (35).
5. Install the rear seat cushion (34).
6. Install the support cushion (33).
7. Install the rear seat cushion cover (32).
8. Install the seat belt catch (31).
9. Install the seat back tilt button (30).
10. Install the lower support cover (29).
11. Install the top cover of the support (28).
12. Install the rear seat catch assembly (27).
13. Install the seat back tilt cable (26).
14. Install the gas shock absorber (25).
15. Install the seat backrest tilt adjustment device (24).
16. Install the spring (23).
17. Install the rod (22).
18. Install the seat back tilt device cover (21).
19. Install the shaft (20).
20. Install the rear seat back frame (19).
21. Install the rear seat back cushion (18).
22. Install the rear seat back cover (17).
23. Install the rear seat rear panel (16).
24. Install the headrest guide (15).
25. Install the rear seat side backrest (14).
26. Install the seat folding button trim (13).
27. Install the seat folding button (12).
28. Install the rear seat back assembly (11).
29. Install the grab cable B (10).
30. Install the hinge bracket (9).
31. Install the gripper cable A (8).
32. Connect the gripper cable connection A, B (7).
33. Connect the seat back tilt cable connection (6).
34. Install the rear seat lower cover (5).
35. Connect the gas shock absorber connection (4).
36. Install the canopy cover (3).
37. Install the center cover of the seat back tilt adjustment device (2).
38. Install the lower cover of the seat back tilt adjustment device (1).
Right seat (long wheelbase model)
Note: When assembling, tighten the bolts to the tightening torques shown in the figure.
1. Install the plug (42).
2. Install the striker (41).
3. Install the striker cover (40).
4. Install the rear seat cushion frame (39).
5. Install the rear seat cushion (38).
6. Install the rear seat cushion cover (37).
7. Install the central seat belt (36).
8. Install the seat belt catch (35).
9. Install the seat back tilt button (34).
10. Install the lower support cover (33).
11. Install the top cover of the support (32).
12. Install the rear seat catch assembly (31).
13. Install the seat back tilt cable (30).
14. Install the gas shock absorber (29).
15. Install the seat backrest tilt adjustment device (28).
16. Install the spring (27).
17. Install the rod (26).
18. Install the seat back tilt device cover (25).
19. Install the shaft (24).
20. Connect the central seat belt connection (23).
21. Install the rear seat belt protector (22).
22. Install the rear seat back cushion frame (21).
23. Install the rear seat back cushion (20).
24. Install the rear seat back cover (19).
25. Install the seat belt fastening cover (18).
26. Install the rear seat belt center cover (17).
27. Install the headrest guide (16).
28. Install the cup holder (15).
29. Install the armrest (14).
30. Install the rear seat rear panel (13).
31. Install the rear seat side backrest (12).
32. Install the seat folding button trim (11).
33. Install the seat folding button (10).
34. Install the rear seat back assembly (9).
35. Install the gripper cable A (8).
36. Connect the gripper cable connection A (7).
37. Connect the seat back tilt cable connection (6).
38. Install the rear seat lower cover (5).
39. Connect the gas shock absorber connection (4).
40. Install the center cover of the seat back tilt adjustment device (3).
41. Install the seat belt catch (2).
42. Install the lower cover of the seat back tilt adjustment device (1).