Contents: Convergence ⤓ Collapse ⤓
Convergence
Nominal value:
- In the center of the tire tread 3±3 mm
- Toe angle (per wheel) 0°06'±06'
To adjust, turn the bolts securing the right and left auxiliary rear suspension arms (convergence control levers) by the same amount.
Left side:
Clockwise, looking from the rear - decreasing toe-in
Right side:
Clockwise, looking from the rear - increasing toe-in
Moreover, the toe-in adjustment can be performed in increments of approximately 2.5 mm.
Collapse
Nominal value: - 0°00'±30'
Note: The camber is set at the factory and is not adjusted during operation. If the camber is not as required, check and replace any bent or damaged parts.