1. Remove the A-pillar.
2. Remove the clutch lever limiter stand (1).
3. Remove the clutch switch sensor (cars with cruise control system) (2).
4. Remove the spring pin (3).
5. Remove the pin with the hole for the cotter pin from the pedal assembly (4).
6. Unscrew the clutch master cylinder fastening nut (5).
7. Loosen the master cylinder lever mounting bolt (6).
8. Remove the return spring (7).
9. Remove the bushing (8).
10. Remove the pedal cover (9).
11. Remove the clutch pedal assembly (10).
The source of the article is available at: MitsubishiMan