Checking the Clutch Pedal Position Switch (Mitsubishi Space Star)

1. Disconnect the connector from the clutch pedal position switch.

2. Measure the resistance between contacts 1 and 2 of the switch connector (Fig. 6.32).

Fig. 6.32. Clutch pedal position switch

3. Make sure that when you press the clutch pedal, the resistance between the contacts is zero, and when you release the pedal, it is infinity.

3. If the clutch pedal switch conductivity is not as specified, replace the switch.

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article was reviewed by: Miroslav Rakov

Share with friends:

◀ Previous

Space Star: Fuel injection system GDI

Next ▶

Checking the throttle servo
Checking fuel injectors
Checking the oxygen concentration sensor
Checking the accelerator pedal switch
Checking the accelerator pedal position sensor

High pressure fuel pump for engines manufactured since 1999
High pressure fuel pump for engines manufactured since 2000
Fuel injectors for engines manufactured since 1999
Fuel injectors for engines produced since 2000
Throttle body of the engine since 1999

Similar materials for other Mitsubishi models