Checking the accelerator pedal switch (Mitsubishi Space Star)

1. Disconnect the connector from the accelerator pedal position sensor (see Fig. 6.6).

2. Measure the resistance between contacts 4 and 5 of the accelerator pedal position sensor connector (see Fig. 6.6).

Normal condition

Accelerator pedal	Conductivity
Pressed	Opened
Not pressed	Closed

3. If the accelerator pedal switch conductivity is not as specified, replace the accelerator pedal position sensor assembly.

Note: After replacement, adjust the position of the accelerator pedal sensor.

(The original can be found on the website mitsubishiman.ru)