Note: When installing, tighten the bolts to the torques shown in the figure.
1. Install the rear propeller shaft (2).
Caution: Be careful not to damage the seal lip on the transfer case side.
1) Install the rear propeller shaft, aligning the alignment marks on the differential connecting flange and the outer CV joint ring.
2. Install the front propeller shaft (1).
Caution: Be careful not to damage the seal lip on the transfer case side.
1) Install the front propeller shaft, aligning the alignment marks on the differential coupling flange and the propeller shaft flange.
3. Install cross beam No. 2.
4. Pour oil into the transfer case.
5. Install engine protection.