Front Speaker Installation Details
1 - Loudspeaker; 2 - Contact connector
Door HF Speaker Installation Details
1 - Decorative overlay; 2 - HF speaker; 3 - Door interior trim panel; 4 - Decorative grille; 5 - Lid; 6 - Loudspeaker; 7 - Speaker mounting bracket
Details of a typical rear speaker setup
1 - Decorative grille; 2 - Loudspeaker; 3 - Rear shelf
Front speakers
Removal
1. The front speakers are mounted on top of the vehicle's instrument panel. The front speaker installation details are shown in the accompanying illustration.
2. Disconnect the negative cable from the battery.
Warning! If the car stereo system is equipped with a security code, make sure you have the correct combination to activate the audio system before disconnecting the battery!
3. Remove the front speaker grille.
4. Release the clips, disconnect the wiring and remove the speaker from the instrument panel. Be extremely careful not to damage the speaker membrane.
Installation
Installation is carried out in reverse order.
[The article is reprinted from a web resource MitsubishiMan.ru]
Door Speakers
Removal
1. Disconnect the negative cable from the battery.
Warning! If the car stereo system is equipped with a security code, make sure you have the correct combination to activate the audio system before disconnecting the battery!
2. Remove the door interior trim panel (see Chapter Body).
3. Remove the mounting screws, release the speaker from its mounting socket in the door frame and disconnect the electrical wiring from it. Be extremely careful not to damage the speaker membrane.
 |  |
Installation
Installation is carried out in reverse order.
Door tweeters
Removal
1. The installation details of the door speaker are shown in the illustration.
2. Disconnect the negative cable from the battery.
Warning! If the car stereo system is equipped with a security code, make sure you have the correct combination to activate the audio system before disconnecting the battery!
3. Remove the mounting screws
4. Release the speaker from its socket and disconnect the electrical wiring from it.
Installation
Installation is carried out in reverse order
Rear speakers
Removal
1. Rear speakers are usually mounted on the rear shelf of the passenger compartment, their installation details are shown in the illustration.
2. Disconnect the negative cable from the battery.
Warning! If the car stereo system is equipped with a security code, make sure you have the correct combination to activate the audio system before disconnecting the battery!
3. Remove the speaker grille.
4. Remove the mounting screws.
5. Release the speaker from the mounting hole in the rear shelf.
6. Disconnect the wiring and remove the speaker.
Installation
Installation is carried out in reverse order.