Fuel filter
1. Fuel drain pipe to the tank; 2. Fuel supply pipeline; 3. Filter element; 4. Bracket; 5. Manual fuel priming pump; 6. Blow-off screw; 7. Water in fuel sensor
1. Disconnect the water in fuel sensor connector.
2. Unscrew and remove the water in fuel sensor.
3. Using a wrench, unscrew and remove the filter element.
4. Lightly lubricate the gasket of the new filter element with fuel.
5. Place the new filter element in place and tighten it by hand.
6. Install the water in fuel sensor and connect the connector to it.
7. Bleed the power supply system.
[Original source of information: mitsubishiman]