Removal the side impact sensor (Mitsubishi Pajero 4)

1. Turn the ignition key to the "LOCK" position (Blocking).

Note: The left side impact sensor is shown. The position of the right side impact sensor is symmetrical.

2. Disconnect the negative battery terminal (1).

3. Remove the lower center pillar trim (2).

4. Remove the outer part of the seat belt.

5. Remove the front seat belt cover.

6. Remove the side impact sensor (3).

The text of the article was taken from the website: MITSUBISHIMAN

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article was reviewed by: Miroslav Rakov

Share with friends:

◀ Previous

Pajero 4: Safety system (SRS)

Next ▶

Side impact sensor
Installing airbag modules and clock spring
Removal the airbag modules and clock spring
Airbag modules and clock spring
Checking the correct installation

Installing and testing the side impact sensor
Seat belt with pretensioner
Removal the seat belt with pretensioner
Installing a seat belt with pretensioner
Checking the seat belt with pretensioner

Similar materials for other Mitsubishi models