2. Measure the resistance between terminals 1 and 4 of the connector on the sensor side.
Nominal value 3.5-6.5 kOhm
3. Measure the resistance between terminals 2 and 4 of the connector on the sensor side.
In good condition
| Slowly open the throttle valve from fully closed (idling) position in fully open | The resistance changes smoothly in proportion to the throttle opening angle |
4. If the resistance is outside the nominal range or does not change smoothly, replace the throttle position sensor.
Original material on the website mitsubishiman
Note: If necessary, adjust the position of the sensor.