18.1 Turbocharger elements
1. Heat shields; 2. Gasket; 3. Bypass valve; 4. Vacuum hose; 5. Turbocharger; 6. Oil supply pipe; 7. Return hose
1. Remove heat shields (18.1).
2. Disconnect the return hose from the oil sump.
3. Disconnect the oil hose from the turbocharger and oil filter bracket.
4. Loosen the air hose bolt.
5. Disconnect the remaining hoses and wires from the turbocharger.
6. Turn off fixing nuts and remove a turbocharger from a final collector.
7. Fill the compressor with clean engine oil.
8. Installation is carried out in the reverse order of removal. Don't forget to install a new gasket.