Removing
1. Disconnect the negative cable from the battery.
If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
2. Turn out bolts of fastening of a semiaxis to a connecting flange of stubny assembly of a back wheel.
3. Carefully prying with a pry bar, release the inner end of the axle shaft from the rear differential housing - try not to damage the oil seal.
4. Remove the axle shaft from under the car.
5. If necessary, carefully remove the oil seal by prying it out with a screwdriver with a blunt flat blade.
Installation
1. Place a new oil seal in the differential housing - as a mandrel when planting the oil seal, a socket head of a suitable size or a pipe section of the appropriate diameter can be used.
2. Replace the circlip and tuck the inner half shaft trunnion into the differential - make sure the ring snaps into place securely.
3. Screw the bolts of the axle shaft to the connecting flange of the hub and tighten them with the required force (55÷65 Nm).
4. Check the fluid level in the differential, if necessary, make the appropriate adjustments.