Front bumper
1. Towing bar; 2. Facing; 3. Ambient temperature sensor; 4. Bumper
Rear bumper
1. Reversing lights; 2. Bumper
Removal and installation
1. When removing the front bumper, remove the lower cross member for towing by unscrewing 4 (or 5) bolt.
2. Turn away 5 nuts of fastening of a forward facing of a bumper (access to these nuts is provided from the inside of the bumper) and remove the cover.
3. On parts of cars, remove the ambient air temperature sensor.
4. Install props under the bumper, unscrew the fastening bolts (4 bolts on the front and 8 or 10 bolts on the rear bumper), with an assistant, remove the bumper, given the significant weight of this part.
5. Installation is carried out in the reverse order.
6. Tighten the fasteners to the required torque.