10.1a Front bumper elements
1. Unscrew the bolts securing the casing to the body (10.1a and 10.1b).
10.1b Rear bumper elements
2. Remove wires and other elements that interfere with removing the bumper.
3. Have an assistant support the bumper or place a jack under it.
4. Unscrew the mounting bolts and remove the bumper.
5. Installation is carried out in the reverse order of removal.
(The text of the article was obtained from the website: «mitsubishiman.ru»)
6. Tighten the mounting bolts securely.
7. Install the bumper cover and other removed parts.