Checking the oil level in the front axle (Mitsubishi Pajero 4)

1. Remove the lower engine crankcase guard and unscrew the filler plug.

2. Check that the oil level is 8 mm above the lower limit.

3. Tighten the filler plug to the recommended tightening torque.

Tightening torque: 50 + 10 Nm.

(Original source of information: mitsubishiman.ru)

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article was reviewed by: Miroslav Rakov

Share with friends:

◀ Previous

Pajero 4: Drive shafts

Next ▶

Checking the front axle play
Replacing the front wheel hub bolt
Checking the axial clearance of the front wheel hub
Front axle — causes of malfunctions
Special tools

Front axle oil change
Replacing the differential seal
Rear axle — causes of malfunctions
Checking the axial clearance of the rear hub bearing
Checking the resistance force to rotation of the rear wheel hub bearing

Similar materials for other Mitsubishi models