Contents: Fan speed indicator ⤓ Air supply mode indicator…⤓ Air distribution indicator ⤓ Display of the set temperature ⤓ Windshield defroster indicator ⤓ Rear window heating indicator ⤓ Automatic mode indicator ⤓ Air conditioner on indicator ⤓
If the fan speed and air distribution control knobs (selection of deflectors) set to the AUT position, then when the temperature control knob is turned, the fan operating mode is automatically selected (except The display shows the current operating mode of the air conditioner. Even if this mode is not selected using the DISP function key, it is switched automatically each time the position of the air conditioner controls is changed.

Note: After automatically switching to this mode while operating the air conditioner, the display will return to the previous readings if no further operation of the air conditioner is performed within 10 seconds.
Fan speed indicator
The number of bars shows the fan speed.
A. High speed; B. Low speed
Air supply mode indicator (recirculation of air inside the cabin/intake of outside air)
Shows the air conditioner operating mode: supply of outside air or recirculation of air inside the cabin.
C. Outdoor air intake; D. Recirculation
Air distribution indicator
Shows which air deflectors are currently active.





Display of the set temperature
This indicator (E) shows the set air temperature in the passenger compartment.

Windshield defroster indicator

This indicator (F) lights up when air is supplied in the mode
Rear window heating indicator

This indicator (G) comes on when the rear window heating is switched on.
Automatic mode indicator
This indicator (H) lights up when the air conditioner is operating in automatic mode (when both the fan speed and air distribution mode selection knobs are set to the AUT position).

Air conditioner on indicator
This indicator (I) lights up while the air conditioner is operating.

Caution: On models with a 3500 cc engine, this indicator will flash when a fault is detected in the air conditioning compressor. Stop the vehicle in a safe place, turn off the engine and start it again. If after this the air conditioner operation indicator does not flash, there is no malfunction. If the indicator continues to flash, it is recommended to have the vehicle checked.
