1. Turn signals.
Before making a normal turn, set the lever to position (1). When the turn is completed, the lever will automatically return to its original position.
In some cases, the lever does not return automatically. This happens when turning the steering wheel at a small angle. In this case, return the lever to its original position manually.
2. Signal for changing lanes.
When changing lanes, use the position of the lever (2). When you release the lever, it will return to the neutral position.
Note: If the indicator light flashes too quickly, the bulb in the turn signal light may be burned out. It is recommended to conduct a check.
The article is reprinted from this source MITSUBISHIMAN