Checking the compressor electromagnetic clutch (Mitsubishi Space Star)

1. Disconnect the single-pin connector from the electromagnetic clutch (Fig. 18.2).

Fig. 18.2. Location of the single-contact connector of the electromagnetic clutch

2. Using an additional wire, connect the positive terminal of the battery to the terminal of the clutch connector.

3. If the clutch is in good condition, a "click" is heard. If the anchor and pulley do not make contact (there is no "click"), then the electromagnetic clutch is faulty.

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article was reviewed by: Miroslav Rakov

Share with friends:

◀ Previous

Space Star: Heating and air conditioning

Next ▶

Checking the refrigerant level through the sight glass
Heating, ventilation and air conditioning system

Air conditioning system refill
Topping up from a cylinder when the refrigerant level is low
Air Conditioning Compressor Lubricant Oil
Performance check
Checking the fan relay

Similar materials for other Mitsubishi models