2. Unscrew the sleeve and disconnect the cable from the gearbox.
3. Get a cable from all fastenings and clips.
12.4 Squeeze the connector and disconnect the cable from the instrument panel
4. Unscrew the mounting screws of the instrument panel, remove the panel and disconnect the cable (12.4).
5. Get the plug from a back wall of an impellent compartment, stretch a cable in an impellent compartment and remove it from the car.
6. Before installation, lubricate the end of the cable that is installed in the gearbox.
7. Installation is carried out in the reverse order of removal.