2. To adjust the headlights, park the vehicle on a level surface 10 meters from a wall or screen.
3. Stick the vertical strips on the wall in the center of the car and in the center of the headlights.
4. Stick a horizontal strip on the wall also in the center of the headlights.
5. When making adjustments, the vehicle must be on a level surface, the fuel tank must be half full, and the trunk of the vehicle must not be overloaded.
10.6а Arrangement of adjusting screws on closed type headlights
A. Adjustment screw for horizontal adjustment
b. Adjustment screw for vertical adjustment
10.6b On 1989 and earlier Precis models that have headlights with replaceable bulbs, the upper adjusting screw (H) adjusts the headlight horizontally, and the lower adjustment screw (V) - vertically
6. Turn on the dipped beam headlights and adjust the position of the headlights so that the light spot is 5 cm below the horizontal line and 5 cm to the right of the vertical line. To adjust the closed-type headlights vertically, tighten the adjusting screw located on top of the headlight (10.6a). The adjustment screw on the side is used for horizontal adjustment. On models with headlamps with replaceable bulbs, the adjusting screws may be located in different locations (10.6b and 10.6c).
10.6c Location of adjusting screws on Colt, Lancer, Mirage models
A. Adjustment screw for horizontal adjustment
B. Adjustment screw for vertical adjustment
7. Turn on high beam headlights. The light spot should be directly under the crosshairs of the lines on the wall.
8. After adjusting the headlights yourself, contact a professional for fine adjustment as soon as possible.