Contents: Motor oil ⤓ Ignition system ⤓ Cooling system ⤓ Clutch (cable operated) ⤓ Brake system ⤓ Tightening torques, Ft-lbs ⤓
Motor oil
| Type | Universal oil that meets API SF or SF/CC standards |
| Viscosity | See the table |
| Quantity (approximately) | 4.0 l |
| Fuel | Unleaded gasoline with an octane rating of 87 or higher |
| Automatic transmission fluid | |
| Type | Automatic transmission fluid Dexron II |
| Total quantity (approximately) | 5.71L |
| The required amount of fluid when replacing it (approximately) | 4.0 l |
| Manual transmission oil | |
| Type | Gear oil API GL-5 SAE 75/85W |
| Quantity (approximately) | 2l |
| Brake fluid type | DOT3 brake fluid |
| Power steering system fluid | Automatic transmission fluid Dexron II |
| Lubrication of rear wheel bearings | NLGI N₂ EP grease |
Ignition system
| Spark plugs | |
| Type | |
| Engines G62B and G32B 1 6L | BPR7ES-11 |
| Galant turbo models 1990 and later | BPR6ES |
| 1993 Galant models with SOHC 16-valve engine (non-turbo) | BKR5E-11 |
| Colt, Lancer, Mirage models of 1993 with 1.5L engine | BPR5ES-11 |
| All the rest | BPR6ES-11 |
| Spark gap | |
| Galant turbo models 1990 and later | 0.7-0.8 mm |
| All other models | 1.0-1.1 mm |
| Ignition timing angle | See the emission control information label in the engine compartment |
| Cylinder firing order | 1-3-4-2 |
Cooling system
| Coolant quantity (approximately) | 5 liters |
| Thermostat opening temperatures | |
| The thermostat starts to open | 88°C |
| Thermostat is fully open | 100°C |
| Drive belt deflection | |
| Galant and Colt, Lancer, Mirage 1.6L models produced in 1990 and later | 10-14 mm |
| All the rest | 7-9 mm |
Clutch (cable operated)
| Free play of the clutch pedal | |
| Galant models 1990 and later | 6-12 mm |
| All the rest | 25 mm |
| Gap between adjusting nut and insulator | |
| Colt, Lancer, Mirage and Precis models | 6.3 mm |
| Cordia/Tredia models | 3.175 mm |
Brake system
| Thickness of the friction material of the brake linings (minimum permissible) | 3.175 mm |
| Thickness of the friction material of the brake pads (minimum permissible) | 3.175 mm |
| Free play of the steering wheel | 26 mm |
| Valve clearances (engine hot) | |
| Intake valves | 0.15 mm |
| exhaust valves | 0.25 mm |
| Injection valves | 0.25 mm |
Tightening torques, Ft-lbs
| Engine with automatic transmission | |
| Oil pan mounting bolts | 8 |
| Oil filter mounting bolts | 7 |
| Drain plug | 25 |
| Manual transmission drain and filler plugs | 25 |
| Oil sump drain plug | 33 |
| Spark plugs | 15-21 |
| Wheel mounting nuts | 65-80 |
| Rear wheel bearing mounting nut | |
| Castle nut | |
| Stage 1 | 12 |
| Stage 2 | loosen to 0 |
| Stage 3 | 4-7 |
| Self-locking nut | 72-108 |
Engine Oil Viscosity Chart - For improved fuel economy and easier starting, choose the oil with the lowest viscosity
The original material is posted on the website (mitsubishiman.ru)
