2. Set the distance between the screen and the center of the headlight to 5 m (Figure 15.7).
Figure 15.7. Set the distance between the screen and the center of the headlight to 5 m
3. Check whether the light beam displayed on the screen corresponds to the required one (Figure 15.8).
Nominal value:
- vertical direction - 60 mm below the horizontal line (H);
- horizontal direction - the position at which 15° of the vertical line (V) slope is cut off.
Figure 15.8. Check if the light beam displayed on the screen matches the required one
4. Adjust the headlight beam using the adjusting bolts (Figure 15.9).
Figure 15.9. Adjust the headlight beam with the adjusting bolts