Tightening torques for elements and parts of 4G1 engines
| Name | Tightening torque, Nm |
| Coolant pump pulley mounting bolt | 9 |
| Crankshaft Groove Pulley Fastening Bolt | 14 |
| Crankshaft center bolt | 105 |
| Timing Belt Tensioner Fastening Bolt | 24 |
| Camshaft pulley mounting bolt | 70 |
| Intake manifold | |
| Coolant temperature sensor | 11 |
| Coolant temperature gauge | 30 |
| Nut and bolt for fastening the thermostat housing | 19 |
| Intake manifold mounting nut and bolt | 18 |
| Resonator mounting bracket bolt | 18 |
| Bolt and nut for fastening the resonator | 18 |
| Exhaust manifold and coolant pump | |
| Coolant pump mounting bolt | 14 |
| Generator tension bar mounting bolt | g 24 |
| Rocker arm and camshaft | |
| Cylinder head cover mounting bolt | 1,8 |
| Rocker Arm Shaft Support Bolt - 12-Valve Engines | 32 |
| Rocker Arm Shaft Support Bolt - 8-Valve Engines | 24 |
| Oil pan and oil pump | |
| Drain plug of the pan | 40 |
| Pallet mounting bolt | 7 |
| Overpressure valve plug | 45 |
| Oil pump cover bolt | 9 |
| Connecting rod and piston group | |
| Connecting rod cap mounting bolt M7 | 20 + 1/4 turn |
| Connecting rod cap mounting bolt M8 | 34 |
| Crankshaft, flywheel and drive disk | |
| Flywheel and drive disk | 135 |
| Clutch housing cover | 9 |
| Main bearing cap mounting bolt | 53 |
[The material was copied from the website MITSUBISHIMAN]