Contents: Gaps ⤓ Tightening torques of threaded…⤓
Gaps
End clearances of the adjusting sleeve of the gear selector lever with the lever
Galant - from 15.2 to 15.0 mm
All others
1986 and earlier models - 17.2 to 17.9 mm
Models since 1987 - from 15.2 to 15.9 mm
Throttle cable (TV) clearance - 1±0.5 mm
Tightening torques of threaded connections Nm
Gearbox to engine mounting bolts
- 6 x 12 mm - from 9.5 to 12
- 8 x 12 mm - from 30 to 49
- 8 x 20 mm - from 15 to 17
- 8 x 6 mm - from 30 to 34
- 10 x 40 mm - from 43 to 55
- 10 x 55 mm - from 22 to 31
- 10 x 65 mm - from 43 to 55
Torque converter to drive disc mounting bolts - 41 to 48
Drain and filler plugs - See Chapter 1
Throttle Cable Lower Bracket Bolt - 13
Transmission Neutral Position Sensor Bolts - 11
Fluid pan bolts - See Chapter 1
Starter bolts - 27 to 34