Contents: Removal the brake drum of the…⤓ Installing the brake drum of the…⤓ Checking the brake drum of the…⤓
Removal the brake drum of the parking brake system
Short wheelbase car
1. Remove the rear brake drum caliper (1).
2. Remove the rear brake drum (2).
3. Remove the brake shoe retaining spring (3).
4. Remove the brake shoe guide plate (4).
5. Remove the adjusting wheel spring (5).
6. Remove the regulator assembly (6).
7. Remove the spacer (7).
8. Remove the brake shoe spacer springs (8).
9. Remove the brake shoe retaining cap (9).
10. Remove the brake shoe retaining spring (10).
11. Remove the brake shoe retaining pin (11).
12. Remove the brake shoe (12).
13. Disconnect the parking brake cable connection (13).
14. Remove the brake shoe and parking brake lever assembly (14).
15. Remove the retainer (15).
16. Remove the wave washer (16).
17. Remove the parking brake lever (17).
18. Remove the brake shoe (18).
Long wheelbase car
1. Remove the rear brake drum caliper (1).
2. Remove the rear brake drum (2).
3. Remove the brake shoe retaining spring (3).
4. Remove the spacer (4).
5. Remove the brake shoe spacer spring (5).
6. Remove the brake shoe retaining spring (6).
7. Remove the brake shoe retaining pin (7).
8. Remove the brake shoe (8).
9. Remove the regulator assembly (9).
10. Remove the adjusting wheel spring (10).
11. Remove the brake shoe retaining spring (11).
12. Remove the brake shoe retaining pin (12).
13. Disconnect the parking brake cable connection (13).
14. Remove the brake shoe (14).
15. Remove the retainer (15).
16. Remove the parking brake lever (16).
17. Remove the brake shoe (17).
Installing the brake drum of the parking brake system
Short wheelbase car
Note: When installing, tighten the bolts to the torques shown in the figure.
1. Install the brake shoe (18).
2. Install the parking brake lever (17).
3. Install the wave washer (16).
4. Install the retainer (15).
5. Install the brake shoe and parking brake lever assembly (14).
6. Connect the parking brake cable connection (13).
7. Install the brake shoe (12).
8. Install the brake shoe retaining pin (11).
9. Install the brake shoe retaining spring (10).
10. Install the brake shoe retaining cap (9).
11. Install the brake shoe spacer spring (8).
12. Install the spacer (7).
13. Install the regulator assembly (6).
14. Install the adjusting wheel spring (5).
15. Install the brake shoe guide plate (4).
16. Install the brake shoe retaining spring (3).
17. Install the rear brake drum (2).
18. Install the rear brake drum caliper (1).
Long wheelbase car
Note: When installing, tighten the bolts to the torques shown in the figure.
1. Install the brake shoe (17).
2. Install the parking brake lever (16).
3. Install the retainer (15).
4. Install the brake shoe (14).
5. Connect the parking brake cable connection (13).
6. Install the brake shoe retaining pin (12).
7. Install the brake shoe retaining spring (11).
8. Install the adjusting wheel spring (10).
9. Install the regulator assembly (9).
10. Install the brake shoe (8).
11. Install the brake shoe retaining pin (7).
12. Install the brake shoe retaining spring (6).
13. Install the brake shoe spacer spring (5).
14. Install the spacer (4).
15. Install the brake shoe retaining spring (3).
16. Install the rear brake drum (2).
17. Install the rear brake drum caliper (1).
Checking the brake drum of the parking brake system
1. Measure the thickness of the brake pads.
Default value:
- Short wheelbase vehicle: 3.0 mm.
- Long wheelbase vehicle: 4.0 mm.
Limit value:
- Short wheelbase vehicle: 1.0 mm.
- Long wheelbase vehicle: 1.0 mm.
2. If the brake pad thickness is beyond the limit values, it is necessary to replace the brake pads on both sides of the vehicle.
3. Measure the inner diameter of the brake drum in two places.
Default value:
- Short wheelbase vehicle: 199 mm.
- Long wheelbase vehicle: 210 mm.
Limit value:
- Short wheelbase vehicle: 200 mm.
- Long wheelbase vehicle: 211 mm.
4. If the value of the inner diameter of the brake drum is outside the limit values, the brake drum must be replaced.