Removal the parking brake lever
1. Remove the floor console.
2. Remove the bracket (1).
3. Remove the floor console bracket (2).
4. Unscrew the adjusting nut (3).
5. Disconnect the parking brake cable connection (4).
6. Remove the parking brake stand (5).
7. Remove the bushing (6).
8. Remove the parking brake lever assembly (7).
9. Remove the parking brake switch (8).
Installing the parking brake lever
The article is reprinted from a web resource: mitsubishiman
Note: When installing, tighten the bolts to the torques shown in the figure.
1. Install the parking brake switch (8).
2. Install the parking brake lever assembly (7).
3. Install the sleeve (6).
4. Install the parking brake stand (5).
5. Connect the parking brake cable connection (4).
6. Tighten the adjusting nut (3).
7. Install the floor console bracket (2).
8. Install the bracket (1).
9. Adjust the travel of the parking brake lever.
10. Install the floor console.