Short wheelbase model
Note: When assembling, tighten the bolts to the torques shown in the figure.
1. Install the caliper body (16).
2. Install the piston seal (15).
3. Install the piston (14).
4. Install the piston dust cover (13).
5. Install the dust cover ring (12).
6. Install the boot pin (11).
7. Install the caliper bracket (10).
8. Install the sleeve (9).
9. Install the locking pin (8).
10. Install the brake shoe clamp (7).
11. Install the brake shoe assembly (6).
12. Install the brake shoe lining (5).
13. Install the brake shoe (4).
14. Install the brake shoe lining (3).
15. Install the brake shoe and brake shoe lining assembly (2).
(The article is reprinted from a web resource: MitsubishiMan.ru)
16. Install the guide pin (1).
Long wheelbase model
Note: When assembling, tighten the bolts to the torques shown in the figure.
1. Install the caliper body (13).
2. Install the piston seal (12).
3. Install the piston (11).
4. Install the piston dust cover (10).
5. Install the sleeve (9).
6. Install the dust cover (8).
7. Install the caliper mount (7).
8. Install the upper sliding pin (6).
9. Install the brake shoe clamp (5).
10. Install the brake shoe (4).
11. Install the brake lining (3).
12. Install the brake shoe and brake shoe lining assembly (2).
13. Install the lower movable pin (1).
Examination
1. Check the cylinder for wear, damage or corrosion.
2. Check the piston surface for wear, damage or corrosion.
3. Check the caliper body or bushing for wear.
4. Check for damage or oil on the brake pad linings, as well as for damage on the metal bases of the pads.