12.2 Remove the lower shock absorber mounting bolt and nut (arrow)
2. Place a jack under the suspension arm and raise it just enough to take some of the spring pressure off the shock. Loosen the lower shock absorber mounting bolt (12.2).
12.3b Mounting bolts of the rear suspension shock absorber (indicated by arrows) located near the trunk wall
13.3 On the Precis model, two wrenches are required to loosen the top fixing bolt and nut
3. Loosen the top nut and bolt (13.3 and 12.3b) and remove the damper.
4. Installation is carried out in the reverse order of removal.