Contents: Removal ⤓ Installation ⤓
Removal
Disconnect the ground cable from the battery.
Drain the fuel from the fuel tank.
Relieve fuel pressure in the fuel line.
Remove the exhaust pipe.
After unscrewing the nuts, disconnect the hoses.
While supporting the fuel tank, loosen the nuts and remove the fuel tank mounting straps.
Remove the fuel tank guard.
Remove the fuel tank assembly.
Disconnect the main fuel hose.
Disconnect the fuel return hose.
Using a special tool, remove the fuel pump cover.
Remove the fuel pump.
Disconnect the fuel vapor recovery system hose.
Remove the fuel tank filler cap.
Remove the filler neck assembly.
Remove the evaporator tube.
Installation
Installation is carried out in reverse order, taking into account the following:
Do not tilt the fuel pump when installing it. Do not allow the gasket (3) - location 2 to become jammed when installing it.
Using the special tool (1), tighten the fuel pump cover to the specified torque.
