2. Use a marker or scratches to make alignment marks on the stabilizer, aligning them with the marks stamped on the stabilizer brackets. This will ensure proper alignment of the stabilizer splines during installation.
10.2. Before removing the stabilizer, apply alignment marks to it that match the marks stamped on the brackets (Precis model)
3. Move the trailing arms so that the stabilizer can be removed from the splines.
4. Check the stabilizer for scratches and damage. Replace the stabilizer if necessary.
The original article is on the website [mitsubishiman.ru]
5. Perform installation in reverse order.
6. Install the rear axle beam.