Changing oil in manual transmission (Mitsubishi Galant 5)

1. Unscrew the drain plug and drain the oil.

35.1. The drain plug of the manual transmission (arrow) is located in the front part of the housing

2. Reinstall the drain plug. Tighten it to the torque specified in the specifications in this chapter.

3. Fill with new fluid until it starts to flow out of the filler hole (see section 25). The type of working fluid is specified in the section "Recommended lubricants and working fluids".

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article was reviewed by: Vladimir Glazunov

Share with friends:

◀ Previous

Galant 5: Maintenance

Next ▶

Replacing the working fluid and filter of the automatic transmission
Changing brake fluid (Precis models only)
Checking, lubricating and adjusting rear wheel bearings (only with drum brakes)
Cooling system maintenance (draining, flushing and filling coolant)
Checking the Heated Air Intake (HAI) Air Filter

Emission control system check and tank replacement
Checking and adjusting the ignition timing
Checking and replacing the positive crankcase ventilation (PCV) valve
Replacing the oxygen sensor

Similar materials for other Mitsubishi models