Technical operations on the car — checking the pressure in the hydraulic control system of the automatic transmission (Mitsubishi Pajero 4)

1. Warm up the oil in the automatic transmission to an operating temperature of 80-100°C.

2. Raise the car on a lift so that the wheels can rotate freely.

3. Connect the adapter fittings to the corresponding plugs (MD998330, MD998900) and pressure gauge (MD998330) (with a measuring range of up to 2942 kPa).

4. Measure the oil pressure in all modes listed in the table and compare them with the nominal values.



5. If the pressure is outside the nominal values, eliminate the cause of this deviation.

Nominal pressure value: 0.22 - 0.73 MPa at 2500 rpm.