Repair of the front bumper of cars manufactured since 1995
Disassembly
1. Remove the bumper from the car.
Fig. 17.43. Design of the front bumper of cars produced since 1995: 1 – outer radiator lining; 2 – internal radiator grille; 3 – radiator grille rim; 4 – front bumper reinforcement; 5 – front fog light; 6 – Front fog light cover; 7 – outer bumper cover
2. Remove the outer lining 1 (Fig. 17.43) of the radiator.
3. Remove the rims 3 and inner grilles 2 from the outer radiator trim.
4. Unscrew three screws and remove the front fog lights 5.
5. Unscrew the screws from the bottom of the bumper and remove the front bumper reinforcement 4.
6. Loosen the screws and remove the 6 front fog light covers.
Assembly
Assembly is carried out in the reverse order of disassembly.
Repair of the front bumper of cars manufactured since 1999
Disassembly
1. Remove the bumper from the car.
Fig. 17.44. Design of the front bumper of cars produced since 1999: A - cars with fog lights; B – vehicles without fog lights; 1 – right radiator grille; 2 – left radiator grille; 3 – insert; 4 – front bumper reinforcement; 5 – dynamic damper; 6 – Front fog light; 7 – lower radiator grille; 8 – outer bumper cover; 9 – Front fog light cover; 10 – bumper cover
The original material is posted on the website (mitsubishiman.ru)
2. Loosen the screws and remove the right 1 and left 2 radiator grilles (Fig. 17.44).
3. Release the clips and remove the bumper cover 10.
4. Unscrew 3 screws and remove the front fog lights 6.
5. Unscrew the screws from the lower and upper sides of the bumper and remove the front bumper reinforcement 4.
6. On vehicles with diesel engines, unscrew the four bolts and remove the dynamic damper 5.
7. Remove insert 3.
8. Loosen the screws and remove the covers 9 of the front fog lights.
9. Remove the lower radiator grille 7.
Assembly
Assembly is carried out in the reverse order of disassembly.