Removing
- Disconnect the wire from the negative battery terminal.
- Remove the turbocharger.
- Disconnect the vacuum hoses from the vacuum reservoir (pic. 4.40).
Pic. 4.40. Intake and exhaust manifolds: 1 - vacuum hose; 2 - vacuum receiver; 3 - engine bracket; 4 - intake and exhaust manifolds assy; 5 - tube of the exhaust gas recirculation system; 6 - exhaust gas recirculation valve (EGR); 7 - intake manifold; 8 - exhaust manifold; 9 - prokladka intake and exhaust manifold
- Turn out bolts and remove a vacuum receiver.
- Turn out bolts and remove an engine bracket.
- Disconnect the exhaust gas recirculation pipe from the manifold.
- Turn out bolts and remove the valve of recirculation of the fulfilled gases (EGR).
- Loosen the nuts and remove the intake and exhaust manifold assemblies and gasket.
Installation
- Installation is carried out in the reverse order of removal, taking into account the following.
- Install the turbocharger.
- Connect the wire to the negative battery terminal.