Checking the fuel temperature sensor (Mitsubishi Space Star)

1. Disconnect the connector from the fuel temperature sensor (Fig. 8.11).

Fig. 8.11. Location of the fuel temperature sensor

2. Measure the resistance between the contacts of the fuel temperature sensor connector (Fig. 8.11).

Resistance at 25°C: 2.05 kOhm

3. If the resistance differs from the required value, replace the sensor.

(The original was published on the website: mitsubishiman)

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article was reviewed by: Miroslav Rakov

Share with friends:

◀ Previous

Space Star: Diesel supply system F9Q1

Next ▶

Checking fuel injectors
Checking the accelerator pedal position sensor (2nd channel)
Checking the accelerator pedal position sensor (channel 1)
Checking the coolant temperature sensor
Checking the engine air temperature sensor

Checking the fuel pressure regulator
Checking the crankshaft angle sensor
Checking the Throttle Control Solenoid Valve
Checking the throttle servo
High pressure fuel pump

Similar materials for other Mitsubishi models