2. Disconnect the lower instrument panel, which is located under the glove compartment.
10.3 The standard fan motor is shown. You should disconnect the connection connector and loosen the clamps (indicated by arrows), then unscrew the mounting bolts.
3. Disconnect the wires from the engine and disconnect the wire harness from the clamps (10.3).
4. Unscrew the bolts and remove the supercharger housing.
5. When replacing the heating and air conditioning motor, the fan must be disconnected.
6. Installation is carried out in the reverse order of removal.
[The text of the article was taken from the website: mitsubishiman]