2. Remove the lower decorative panel under the glove compartment.
3. Disconnect the electrical connector from the supercharger and the wire harness from the clamps.
10.3 Typical supercharger and its mounting parts - disconnect the electrical connectors and release the clamps (shown with arrows), then unscrew the mounting screws (Precis model shown, others are similar)
4. Unscrew the screws securing the blower to the heater body, then remove the blower.
5. If the motor is being replaced, move the fan to the new motor before installation.
6. Perform installation in reverse order. Check the performance of the supercharger.