Nominal value: 6-7 clicks.
2. If the stroke of the parking brake lever does not correspond to the standard value, adjust it as described below.
3. Remove the floor console cup holder, loosen the adjusting nut to the end of the cable rod to release the cable, and then adjust.
4. Turn the adjusting nut to adjust the nominal stroke of the parking brake lever. After adjustment, make sure there is no gap between the adjusting nut and the parking brake lever.
Caution: If the parking brake lever stroke is less than the nominal value and braking is very strong, the rear brakes may grab (slow down).
5. After adjusting the travel of the parking brake lever, raise the rear of the vehicle with a jack. Lower the parking brake lever all the way down and, by rotating the rear wheels, make sure that the rear brakes do not grab.