Replacing the oil filter (Mitsubishi Carisma)

1. Using special tool MB991610, unscrew the oil filter.

2. Wipe the surface of the filter mounting bracket.

3. Lubricate the surface of the new filter sealing ring with a small amount of clean automatic transmission fluid.

4. Using special tool MB991610, install the new filter and tighten it to a torque of 12 Nm.

5. Check the level of working fluid in the automatic transmission.

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article was reviewed by: Dmitry Vasiliev

Share with friends:

◀ Previous

Carisma: Automatic gearbox

Next ▶

Replacement of working fluid
Checking the level of working fluid in the gearbox
General information about automatic transmission
Specifications and data

Checking the starter lock mechanism
Checking the automatic transmission mode shift lock mechanism
Adjusting the selector cable
Adjusting the selector switch and control cable
Checking the electromagnetic valves

Similar materials for other Mitsubishi models