Fig. 16.24. Power steering pump of a car with a gasoline engine: 1 - pump drive belt; 2 - pressure sensor connector; 3 - suction filter; 4 - pressure hose; 5 - sealing rings; 6 — bracket; 7 - Power steering pump; 8 - pump support; 9 - pump bracket
Removal
1. Drain the power steering fluid.
2. Loosen and remove the pump drive belt.
3. Loosen the clamp and disconnect the suction hose from the pump.
4. Unscrew the hollow bolt and disconnect the pressure hose from the pump.
5. Unscrew the bolt and remove the bracket.
6. Remove the bolts and power steering pump.
Examination
1. Check the pump drive belt for cracks.
2. Check the pulley for uneven rotation.
Installation
1. Installation is carried out in the reverse order of removal.
2. Fill the fluid and bleed the hydraulic power steering drive.
3. Check the tension of the pump drive belt.
4. Check the pressure generated by the pump.