Rear combination light (Mitsubishi Space Star)

Fig. 19.96. Rear combination light:1 - Multifunctional steering column switch (with light and turn signal switch); 2 - decorative trim for switches; 3 - fog light switch; 4 - rear combination light; 5 - nozzle; 6 - sealing ring; 7 - wiring harness with cartridges; 8 - lamp

Removal

• Disconnect the cable from the negative battery terminal.
• Remove the multifunction steering column switch (see section "Steering").
• To remove the fog light switch, use a screwdriver to pry off the switch trim, then disconnect the connector, squeeze the latches and remove the switch.
• Remove the screws securing the rear light and remove it from the vehicle.

Checking the rear fog light switch

• Check the conductivity between the contacts at different positions of the fog light switch (Fig. 19.95).

Fig. 19.95. Rear fog light switch connector pin location

• If the conductivity is different from the required value, replace the switch.

Checking the rear fog light relay

• Remove the rear fog light relay and check the continuity between the relay contacts (Fig. 19.97).

Fig. 19.97. Location of rear fog light relay

• If the conductivity is different from the required value, replace the relay.