Contents: Removal ⤓ Installation ⤓
Removal
- Remove the air filter.
- Remove the center console.
- Remove the lower transmission bracket.
- Remove the gear shift lever handle by pulling it upwards (Fig. 12.14).
Fig. 12.14. Gear shift mechanism of the F5MV1 gearbox:1 - gear shift lever handle; 2 - gear selector cable tip (gear shift lever side); 3 - retainer; 4 - gear shift cable tip (gear shift lever side); 5 - gear selection cable tip (gearbox side); 6 - gear shift cable tip (gearbox side); 7 - shift cables and gear selection cable assembly; 8 - gear shift lever assembly; 9 - spacer sleeve; 10 - bushing
- Disconnect the gear selector cable from the gear shift lever (gear shift lever side).
- Remove the retainer and disconnect the gear shift cable (from the gear shift lever side).
- Remove the cotter pins, disconnect (from the gearbox side) the gear selection and shift cables.
- Loosen the nuts securing the cable seal to the body and remove the cables from the vehicle.
- Remove the bolts, bushings, spacers and gear shift lever assembly.
Installation
- Installation is carried out in the reverse order of removal, taking into account the following.
- Install the gear shift lever on the gearbox and the lever
- shifting gears in the cabin to neutral position.
- Inside the vehicle, connect the shift and selector cables to the gear shift lever.
- On the gearbox side, connect the ends of the shift and selector cables and secure them with cotter pins.
- Install the lower transmission bracket.
- Install the center console.
- Install the air filter.
- Move the gearshift lever to all operating positions and check its functionality. Shifting should be smooth and without sticking.