2. Unscrew the transmission oil temperature sensor (Fig. 12.6).
Fig. 12.6. Location of the temperature sensor
3. Place the transmission oil temperature sensor in a container with transmission oil (Fig. 12.7). Insert the oil thermometer, heat the container with oil and measure the resistance between the contacts of the transmission oil temperature sensor.
Fig. 12.7. Measuring the resistance of the transmission oil temperature sensor
Resistance:
- at 20°C: 2.31 - 2.59 kOhm
- at 110°C: 0.145-0.149 kOhm
(The text of the article was obtained from the website www.MitsubishiMan.ru)
4. If the resistance is not as specified, replace the transmission oil temperature sensor.
5. Screw in the transmission oil temperature sensor and tighten it to the specified torque.
Tightening torque: 20-25 Nm
6. Screw in the transmission oil drain plug and tighten it to the specified torque.