The blown jumpers used on these models are similar to fuses in that their condition can also be visually inspected. To replace a blown jumper, disconnect the negative battery cable. Remove the blown jumper from the connector and replace it with a new one. Always determine the cause of the old jumper failure before installing a new one.
Caution: If your car stereo has a coding system, make sure you know the activation code for the stereo before disconnecting the battery.
4.1a On early models, the main blown jumper (indicated by the arrow) is installed on the battery wire
4.1b On later year models, disconnect the jumper and replace it with a new one - eliminate the cause of the burnt jumper before installing a new burnt jumper
The text of the article was obtained from the website: www.mitsubishiman.ru