Differential — design description (Mitsubishi Colt 5)

The differential is shown in Figure 11.43.

Figure 11.43. Differential: 1 - Bolt; 2 - Differential drive gear; 3 - Ball bearing (F4M21, F5M21, W5M31); 4 - Tapered roller bearing (F5M22, F5M31), 5 - Pin; 6 - Satellite shaft; 7 - Satellites; 8, 10 - Adjusting washers; 9 - Half shaft gear; 11 - Differential housing

(The material was borrowed from the website: «www.mitsubishiman.ru»)

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article was reviewed by: Peter Ermakov

Share with friends:

◀ Previous

Colt 5: Manual gearbox F4M21/F5M21

Next ▶

Secondary shaft of the gearbox W5M31
Secondary shaft — description and removal
Intermediate shaft — disassembly, inspection and assembly
Intermediate shaft — design description
Gearbox Primary Shaft — Assembly

Differential — disassembly and assembly
Center differential (for all-wheel drive vehicles with manual transmission W5M31)
Intermediate body for all-wheel drive vehicles with differential lock
Gear shift forks for manual transmissions — design description
Speedometer Drive Gear

Similar materials for other Mitsubishi models

➤ Differential Gearbox: Checking Oil Level Mitsubishi Lancer 3 and 5 (1984-1992)
➤ Replacing ATF automatic transmission and differential final… Mitsubishi Galant 6 and 7 (1987-1998)
➤ Toothed drive belts — design description Mitsubishi L200 4 (2005-2014, diesel)
➤ Changing the oil in the differential of the front and rear… Mitsubishi Outlander 1 (2003-2008)
➤ Design and description of the ignition system Mitsubishi Pajero 1 and 2 (1982-1999)

Link in different formats to this article