Checking the fluid level in the hydraulic drive reservoir of cars with gasoline engines
Fig. 2.13. Checking the clutch hydraulic fluid level
The working fluid level in the tank must be checked regularly when working in the engine compartment. At the same time, the hydraulic system should be checked for leaks. The fluid level should always be between the "MAX" and "MIN" marks on the tank body (Fig. 2.13).
Add fluid to the reservoir if necessary.
Rapid fluid consumption indicates a leak in the clutch hydraulic drive. In this case, you should immediately contact an authorized Mitsubishi dealer to check and repair the system.
Use brake fluid that meets DOT 3 or DOT 4 specifications. Tighten the clutch reservoir cap securely to prevent contamination of the clutch fluid and moisture from entering it.
Checking the fluid level in the hydraulic drive reservoir of vehicles with diesel engines
The clutch hydraulic fluid reservoir is also the brake hydraulic fluid reservoir.