Contents: Removal ⤓ Installation and adjustment ⤓
Removal
1. Disconnect the negative battery cable.
2. Unscrew the adjusting nut.
5.3a The cable is attached to the fork lever using a pin and a cotter pin - after removing them, you can remove the cable sheath and bushing
3. Remove the cable sheath from the bracket and disconnect the cable from the clutch pedal (5.3a and 5.3b)
5.3b Disconnect the cable from the clutch pedal
4. Remove the cable through the rear wall of the engine compartment.
Installation and adjustment
5. When installing, lubricate the ends of the cable with multi-purpose grease. The cable is installed in the reverse order of removal.