Removal the door guide
Front door
1. Remove the inner door handle.
2. Remove the upper door catch holder.
3. Remove the door trim retaining bracket.
4. Remove the water-repellent film (1).
5. Remove the door trim.
6. Remove the inner door waterproof trim (2).
7. Remove the outside rearview mirror.
8. Remove the outer door waterproof trim (3).
9. Remove the door glass guide (4).
10. Unscrew the door opening limiter bolt.
11. Remove the outer door waterproof trim (5).
1) Install the special tool as shown in the figure and remove the outer door waterproof trim from the door panel.
12. Remove the hood side trim, the kick plate and the rear lower square trim (short wheelbase).
13. Remove the hood trim, the protective plate and the center pillar trim (long wheelbase).
14. Remove the inner door waterproof trim (6).
15. Remove the limiter (7).
Back door
1. Remove the inner door handle.
2. Remove the upper door catch holder.
3. Remove the door trim retaining bracket.
4. Remove the water-repellent film (1).
5. Remove the door trim.
6. Remove the inner door waterproof trim (2).
8. Remove the outer door waterproof trim (3).
9. Remove the door glass guide (4).
10. Unscrew the door opening limiter bolt.
11. Remove the outer door waterproof trim (5).
1) Install the special tool as shown in the figure and remove the outer door waterproof trim from the door panel.
12. Remove the lower center pillar trim, kick plate and rear lower square trim (long wheelbase).
13. Remove the inner door waterproof trim (6).
14. Remove the limiter (7).
15. Remove the outer lower waterproof cover (8).
Installing the door guide
Front door
1. Install the limiter (7).
2. Install the inner waterproof door trim (6).
3. Install the hood side trim, kick plate and center pillar trim (long wheelbase).
4. Install the hood side trim, kick plate and rear lower square trim (short wheelbase).
5. Install the outer waterproof door trim (5).
6. Tighten the door opening limiter bolt.
7. Install the door glass guide (4).
8. Install the outer waterproof door trim (3).
9. Install the outside rearview mirror.
10. Install the inner door waterproof trim (2).
11. Install the door trim.
12. Install the water-repellent film (1).
13. Install the door trim retaining bracket.
14. Install the upper door catch holder.
15. Install the inner door handle.
Back door
1. Install the outer lower waterproof cover (8).
2. Install the limiter (7).
3. Install the inner door waterproof trim (6).
4. Install the lower center pillar trim, kick plate and rear lower square trim (long wheelbase).
5. Install the outer waterproof door trim (5).
6. Tighten the door opening limiter bolt.
7. Install the door glass guide (4).
8. Install the outer waterproof door trim (3).
9. Install the inner door waterproof trim (2).
10. Install the door trim.
11. Install the water-repellent film (1).
12. Install the door trim retaining bracket.
13. Install the upper door catch holder.
14. Install the inside door handle.